This extra step is not necessarily something that works against the overall functionality of the table saw, but it is a step down compared to more expensive table saws with quality fences that can be adjusted on the fly, and don't require measuring to confirm accuracy. To achieve straight cuts, the rip fence needs to be measured against the blade after adjusting and locking it in place.
#Tips buy old craftsman table saw manual#
Unfortunately, the fence will need to be manually set because it doesn't have rollers, and as you may suspect, manual setting can lead to human error. This is because the rip fence has a locking mechanism. The rip fence on the Craftsman Evolv Table Saw is one of the features that most owners greatly appreciate. Unlike some higher-end saws, Craftsman doesn't offer any table extension accessories for this unit, so custom extension tables/support will need to be used. Provided that proper support is given, the saw will be able to work with larger pieces of material. Note that this doesn't necessarily mean that the table is limited to ripping material that fits within these measurements. It's crucial for your safety, the saw's performance, and the longevity of the device that all of the above mentioned requirements are met.Īs an entry-level table saw, the Craftsman Evolv has a smaller table space than some more expensive units, and the total rip capacity to the right of the blade is 14.75-inches and to the left, 10.75-inches. Slow RPM and otherwise poor operation can be caused by using poor quality extension cables. Note that the speed of the motor is limited by the power being supplied to the saw. The tool uses a three-pronged power plug, so the extension cable must be of the same design. Anything longer than 50-feet is not suitable for a 15 AMP device and should be avoided. 14-gauge cable should be used for cords up to 25-feet, and 12-gauge cable for 50-foot cords. If you use a circuit that is also powering other devices simultaneously, you should use some sort of breaker protection for the device's safety.Įxtension cords can be used with the Craftman Evolv, however, they must be able to meet the power draw of the unit. Because the saw runs at 120V, this should be enough to activate the tool without causing damage. The power of the motor is definitely one of the assets, but it also means that power guidelines should be adhered to for safety.Įxperts recommend that a 20 AMP rated main outlet is used for the Craftsman Evolv Table Saw. PowerĪt 15 AMP, the Evolv is similar to some of the more expensive and more heavy-duty table saws. In other words, moving the table saw around was not a major concern for the manufacturer when the saw was designed. This is because the Craftsman Evolv Table Saw is designed specifically for use in a home workshop. While it would be fairly easy to move around a workshop, having to load and unload the saw for transportation would be cumbersome.
#Tips buy old craftsman table saw portable#
However, despite the low weight, the Craftsman Evolv Table Saw is not a very portable tool. This is relatively light for a table saw. Completely assembled, the whole unit weighs just over 50 pounds.